FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 1–16 of 721 results
C-Light™ – Manual Activated LED PFD Vest Light w Clip The LED C-Light is a manually activated steady-on personal distress light with dramatically improved operating life. This rugged little waterproof light is USCG SOLAS approved and has a 20 lumen LED that operates typically for 30 hours continuously. The C-Light is activated manually with an…
C-Light™ H20 – Water Activated LED PFD Vest Light w Clip The water activated C-Light from ACR is a feature rich personal distress light that combines intense LED technology with increased operating life to provide you with the ultimate steady-on distress light. The C-Light is USCG SOLAS approved and features an impact resistant case –…
C-Strobe™ – Manual Activated LED PFD Emergency Strobe w Clip The LED C-Strobe is a manually activated personal distress strobe light with dramatically improved operating life. This rugged little waterproof light is USCG SOLAS approved and has a 45 lumen LED that operates typically for 120 hours continuously. The C-Strobe is activated manually with an…
C-Strobe™ H20 – Water Activated LED PFD Emergency Strobe w Clip The water activated C-Strobe from ACR is a feature rich personal distress light that combines intense LED technology with increased operating life to provide you with the ultimate multi-function distress light.The C-Strobe is USCG SOLAS approved and features an impact resistant case – making…
HemiLight™ 3 – Automatic Survivor Locator Light – HL3 Smaller than other approved lights, the HemiLight™ 3 features rounded edges to maintain the integrity of inflatable life jackets. Attachment loops accommodate webbing of up to 5cm (2 ) width. The marine tough design ensures years of useful service. The HemiLight™ 3 offers a basic strobe…
117WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3 16 thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117…
117WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on 2 bronze and stainless steel housings. You can use wrench 117WR-4 to brace the housing when using this wrench. For use with: B117 B150 B744V B744VL B765C SS555
117WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3 16 thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117…
117WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the wrench flats on the side of the housing to facilitate tightening of the hull nut. For 2 bronze and stainless steel housings (P617V, B617V, SS617V). Use wrench 117WR-2 or 117WR-3 for the hull nut. *Note that this wrench will not…
164WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3 16 thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164…
164WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings. You can use wrench 164WR-4 to brace the housing when using this wrench. For use with: B164 SS164 SS264
164WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3 16 thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164…
175WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the wrench flats on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut. For use with: B164 B175 SS164 SS264 IMPORTANT: the design of the housing for these transducers…
60WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3 16 thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60…
60WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on 2 bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench. For use with: B60 SS60
60WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3 16 thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B60…
End of content
End of content
No products in the cart.
